Partial Label Reading Control; Decode Negative Image - Datalogic Gryphon Series Product Reference Manual

Enter/Exit Programming Mode

Partial Label Reading Control

Enable/Disable the option to ignore partial labels to be read within the boundary of the field of
view.
IPPL00
Partial Label Reading Control = Disable

Decode Negative Image

Enable/Disable the ability to decode a negative image for all symbologies. When this feature is
enabled, you will be unable to read normally-printed labels or programming labels in this
manual. Scan the "Disable" bar code below to return the scanner to its default for this feature.
To set the reader to decode only 2D codes, go to
203.
For additional options, see the Aladdin configuration application.
CAUTION
$P,CIPVR00,P(C
R)
Decode Negative Image = Disable
106
Unlike some programming features and options, Decode Negative Image selec-
tions require that you scan only one programming bar code label. DO NOT scan
an ENTER/EXIT bar code prior to scanning a Decode Negative Image bar code.
When this feature is enabled, you will be unable to read other program-
ming labels in this manual.
$P,CIPVR01,P(CR)
Reading Parameters
IPPL01
Partial Label Reading Control = Enable
2D Normal/Inverse Symbol Control" on page
DEFAULT
Decode Negative Image = Enable
Gryphon™ I GD44XX/GBT4400/GM440X