Led And Beeper Indicators; Power On Alert; Good Read: When To Indicate - Datalogic PowerScan 950X Series Instruction Manual

Power On Alert

Disables or enables the indication (from the Beeper) that the reader is
receiving power.
Power On Alert = Power-up Beep

Good Read: When to Indicate

This feature specifies when the reader will provide indication (beep and/or
flash its green LED) upon successfully reading a bar code.
DEFAULT
Indicate Good Read = After Transmit
Product Reference Guide

LED AND BEEPER INDICATORS

Enter/Exit Programming Mode
Power On Alert = Disable (No Audible Indication)
DEFAULT
Indicate Good Read = After Decode
Indicate Good Read =
After CTS goes inactive then active
65