Customizing Configuration Settings
Configure Interface Settings
If after scanning the interface bar code from the previous table, your instal-
lation requires you to select options to further customize your reader, turn
to the appropriate section for your interface type in
ters"
Global Interface Features
See
"Global Interface Features" on page 23
interface types.
Configuring Other Features
If your installation requires different programming than the standard factory
default settings, the following sections of this manual allow configuration of
non-interface-specific settings you might require. Go to
Using Bar Codes, starting on page 21
Software Version Transmission
The software version of the device can be transmitted over the RS-232 and
Keyboard interfaces by scanning the following label.
RevA\r
Self Test and Statistics
The internal status of the reader can be accessed in COM interfaces giving
the following command string through a Terminal Emulator program:
$S,yX,s[CR]
Product Reference Guide
starting on page 21.
Transmit Software Version
(corded reader only).
Customizing Configuration Settings
"Configuration Parame-
for settings configurable by all
Configuration
for a complete list of available options.
17