Registering The Server - HPE ProLiant ML150 Gen9 User Manual

•
Intelligent Provisioning—For single-server deployment, updating, and provisioning capabilities.
To install an operating system on the server with Intelligent Provisioning (local or remote):
Connect the Ethernet cable between the network connector on the server and a network jack.
a.
Press the Power On/Standby button.
b.
During server POST, press F10.
c.
Complete the initial Preferences and Registration portion of Intelligent Provisioning (on page
d.
104).
At the 1 Start screen, click Configure and Install.
e.
To finish the installation, follow the onscreen prompts. An Internet connection is required to
f.
update the firmware and systems software.
•
Insight Control server provisioning—For multi-server remote OS deployment, use Insight Control
server provisioning for an automated solution. For more information, see the Insight Control
documentation on the Hewlett Packard Enterprise website
(http://www.hpe.com/info/insightcontrol/docs).
For additional system software and firmware updates, download the Service Pack for ProLiant from the
Hewlett Packard Enterprise website (http://www.hpe.com/servers/spp/download). Software and
firmware must be updated before using the server for the first time, unless any installed software or
components require an older version.
For more information, see "Keeping the system current (on page 111)."
For more information on using these installation methods, see the Hewlett Packard Enterprise website
(http://www.hpe.com/info/ilo).

Registering the server

To experience quicker service and more efficient support, register the product at the Hewlett Packard
Enterprise Product Registration website (http://www.hpe.com/info/register).
Setup 32