Power-On Selftest - ITech IT6500C Series User Manual

No.
11
12

2.7 Power-on Selftest

A successful selftest indicates that the purchased power product meets delivery
standards and is available for normal usage.
Before operation, please confirm that you have fully understood the safety
instructions.
Power Switch Introduction
User can adjust the power switch directly to turn on or turn off the instrument.
The status of Power switch is as follows.
If the instrument is the cabinet type, the rear panel of the cabinet provides a
master power switch. The relationships between the device status and switch
status are listed in the following table.
Name
System bus
Analog interface
and CAN interface
•
To avoid burning out, be sure to confirm that power voltage
matches with supply voltage.
•
The system bus interface is not isolated from the output
electrode. After power on, it is not allowed to insert or pull out
the bus and terminal matching resistance.
On
Copyright © Itech Electronic Co., Ltd.
Description
Used for communication between instruments in
parallel operation
Analog interface and CAN interface
Off On
Quick Reference
Off
16