Using Telnet; Using Sockets - ITech IT6500C Series User Manual

You can select different interfaces by clicking the seven buttons shown in the
navigation bar on the left side of the window. The detailed descriptions are as
follows.
•
•
•
•
•
•
•

4.4.2 Using Telnet

The Telnet utility (as well as sockets), is another way to communicate with the
instrument without using I/O libraries or drivers. In all cases, you must first es-
tablish a LAN connection from your computer to the instrument as previously
described.
In an MS-DOS Command Prompt box, type "telnet hostname" where hostname
is the instrument's hostname or IP address. Press the Enter key and you should
get a Telnet session box with a title indicating that you are connected to the in-
strument and 23 is the instrument's telnet port. Type the SCPI commands at the
prompt.

4.4.3 Using Sockets

ITECH instruments have SCPI socket services, which can be used to send and
receive SCPI commands, queries, and query responses. All commands must
be terminated with a newline for the message to be parsed. All query responses
will also be terminated with a newline.
Home: Web home interface, displays the model and appearance of the
instrument;
Information: displays the serial number of the instrument and more system
information as well as LAN configuration parameters;
Web Control: enables the Web control to begin controlling the instrument.
This page allows you to monitor and control the instrument;
LAN Configuration: reconfigure the LAN parameters;
Security: change the password and control access to the Web interface;
Manual: go to the ITECH official website and view or download the relevant
documents.
Logout: logout the Web interface.
The instruments allow up to six simultaneous socket connec-
tions to be made.
Copyright © Itech Electronic Co., Ltd.
Remote Control
90