ITech IT6500C Series User Manual page 119

Parameter
Readback stability-30min
（％of Output +Offset）
Readback stability-8h
（％of Output +Offset）
Efficiency
Remote Sense
Compensation Voltage
Command Response Time
Power Factor
Maximum input current8
Maximum input apparent
power
Storage temperature
Protective function
standard Interface
Isolation ( output to ground)
Parallel Number
Working temperature
Dimension ( mm)
Weight( net)
The above specifications may be subject to change without prior notice.
1. Internal absorption current and internal absorption power mean the
absorption current and power of the standard power dissipater inside the power
supply.
2. Resistance programming accuracy differs based on different output current.
For example, 10A Transient 1.0Ω, accuracy: (1.0Ω * 0.25%) +(375mΩ*A /10A)
= 40mΩ.1.0Ω, accuracy: (1.0Ω * 0.25%) +(375mΩ*A /10A) = 40mΩ.
3. Set value accuracy means the set accuracy realized through the panel button
or communication instructions. When external analog is used for programming,
the programming accuracy is 2%FS.
4. Read-back value accuracy means the read-back accuracy realized through
panel display or communication instructions; when external analog is used for
monitoring, the monitoring accuracy is 1%FS.
Current
Voltage
Current
Voltage
Current
89%(50V/120A)～90.5%(200V/30A)
Source OVP, OCP, OPP and Load OCP, OPP, OTP,Vsense
483mmW×194mmH×640.8mmD
Copyright © Itech Electronic Co., Ltd.
IT6533C Ver:V1.6
≤0.2%+120mA
≤0.05%+100mV
≤0.2%+120mA
≤0.05%+100mV
≤0.2%+120mA
2V
20mS
0.99
38A
7600VA
-10℃～70℃
USB/RS232/CAN/LAN
500V
≤8
0～40℃
35Kg
Technical Specification
108