ITech IT6500C Series User Manual page 36

CAN
Enables automatic delay to switch display from setting to
ReturnMeter
measured value (meter).
Off(Def)
On
Power whether power supply was on
P-Out
Off(Def)
Copyright © Itech Electronic Co., Ltd.
Function and Features
Config: Configure LAN
information.
IP-Mode: Set IP mode. Auto/
Manual
Server-Config: Configure the
LAN services.
MDNS：mDNS service state.
Off /On
PING：Ping service state. On/
Off
telnet-scpi：telnet service
state. On/Off
Web: web service state. On/
Off
VX-11VXI-11 service state.
On/Off
Raw-socket: RAWSocket
service state. On/Off。
Restore: Select whether to
reset the LAN to the default
settings or not. And the
settings take effect after
restart.
Reset: Select whether to
confirm the LAN setting or not.
And the settings take effect
after restart.
Select CAN communication
interface
250K: Baud rate
Addr: address of power supply
Prescaler: Prescaler
BS1 Value: Not settable
BS2 Value: Not settable
Auto return Meter function
disabled.
Auto return Meter function
enabled
After power on, the
instrument will be in the off
state.
25