Setup Menu - ITech IT6500C Series User Manual

3.10 Setup Menu

In the configuration menu, the user can configure all parameters related to the
power supply and the load as well as resistance setting.
Configuration parameters of the power supply are as follows:
•
•
•
Configuration parameters of the load are as follows:
•
•
•
•
Source
Setup
Voltage/current/power slope
OVP/OCP/OPP
Maximum and minimum limits of voltage/current/power
Current and power
Current and power slope
OCP/OPP
Maximum and minimum limits of current/power
Configure menu
Slope
OVP
OCP
OPP
Copyright © Itech Electronic Co., Ltd.
Set the source slope
V-Rise: voltage rise slope
V-Fall: voltage fall slope
I-Rise: current rise slope
I-Fall: current fall slope
P-Rise: power rise slope
P-Fall: power fall slope
Over voltage protection of source
On(Def) Enable over voltage protection function
V: OVP value
Delay: delay time of protection
Off Disable over voltage protection function
Over current protection of source
On(Def) Enable over current protection function
I: OCP value
Delay: delay time of protection
Off Disable over current protection function
Over power protection of source
On（Def） Enable over power protection function
P: OPP value
Function and Features
32