ITech IT6500C Series User Manual page 59

User-
de-
fined
Table Indicates a user-defined 4096-point I-V data table. This
menu item is reserved and can only be used in SAS soft-
ware sold separately. This function cannot be used in the
VFD screen.
•
To edit internal curve, follow the operation steps below:
1. Press [Shift]+ [I-set] (Function) to enter the Menu operation.
2. Select PV-SIM with Left/Right key and press [Enter] for confirmation.
3. Select Static with Left/Right key and press [Enter] for confirmation.
Copyright © Itech Electronic Co., Ltd.
Recall Select a PV curve.
Recall
Curve=
1
Edit- Edit a PV curve.
Curve
Pmp
Vmp
SANDIA
E-
N50530
User defined the PV curve table
Voc Set the open-circuit voltage value.
Imp Set the maximum power current value.
Vmp Set the maximum power voltage
value.
Isc Set the short-circuit current value.
Function and Features
Set the name of the PV
curve file and recall the PV
file stored inside the
instrument.
Set the maximum power.
Set the maximum power
voltage.
•
TF：Thin-Film
•
SCMC：Standard Crys-
talline or Multi-
crystalline
•
HEC：High-efficiency
Crystalline
•
TF: Thin-Film
•
cSi
48