ITech IT6500C Series User Manual page 15

Before Connecting the Power Cord
Power Cord Type and Connecting Method
IT6500C series contains many models. Different model is supplied with different
power cord. The power cord and connection of different models are introduced
as follow.
•
IT6500C Series power supply can also work in 110V voltage circumstances.
However, the output power is limited. For full-power output, please according
to the specification and use 220V±10% voltage or 380V±10% voltage.
•
Before connecting power cord, be sure to confirm that the
power voltage matches with the supply voltage.
•
Before connecting power cord, be sure to switch off the
instrument. Power switch is in Off position.
•
To avoid fire or electric shock, Make sure to use the power
cord supplied by ITECH.
•
Be sure to connect the main power socket to the power outlet
with protective grounding. Do not use terminal board without
protective grounding.
•
The instrument rear panel provides a separate screw used for
chassis ground. Please make proper connections. In the
event of a failure, not using a properly grounded protective
earth and grounded outlet may result in personal injury or
death due to electric shock.
•
The power cords supplied with this product is certified for
safety. In case the supplied lines assembly needs to be
replaced, or an extension lines must be added, be sure that it
can meet the required power ratings of this product. Any
misuse voids the warranty of this product.
IT6512C to IT6537C series power supply provides the standard power cords
as below.
The IT6532C to IT6537C series power supply consist of two power supply
units, and ITECH provides two power lines during delivery. The user needs
to connect each power supply unit to the AC 220V power source.
Connecting Method:
Copyright © Itech Electronic Co., Ltd.
Inspection and Installation
4