Inspection And Installation; Verifying The Shipment - ITech IT6500C Series User Manual

1

Inspection and Installation

♦ Verifying the Shipment

♦ Instrument Size Introduction
♦ Connecting the Power Cord
♦ Connecting the Device Under Test (DUT)
1.1 Verifying the Shipment
Unpack the box and check the contents before operating the instrument. If
wrong items have been delivered, if items are missing, or if there is a defect with
the appearance of the items, contact the dealer from which you purchased the
instrument immediately.
The package contents include:
Item
power supply
Power cord
USB cable
Ex-factory Test
Report
Qty.
x1
x1
x1
x1
Upon verification of the shipment, keep the package and relevant contents
thereof in a safe place. When returning the instrument for warranty service or
repair, the specified packing requirements shall be met.
Copyright © Itech Electronic Co., Ltd.
Model Remarks
IT6500C This series include：
series IT6512C/IT6513C/IT6514C/
IT6515C/IT6516C/IT6517C/
IT6522C/IT6523C/IT6524C/
IT6525C/IT6526C/IT6527C/
IT6532C/IT6533C/IT6534C/
IT6535C/IT6536C/IT6537C
- Number of the power cords vary
depending on the model, See the
Section 1.3 Connecting the Power
Cord for power cord connection.
- This accessory is selected when
the USB interface is used for
starting up remote operation.
- It is the test report of the instrument
before delivery.
Inspection and Installation
1