It6526C - ITech IT6500C Series User Manual

4. Read-back value accuracy means the read-back accuracy realized through
panel display or communication instructions; when external analog is used for
monitoring, the monitoring accuracy is 1%FS.
5. Up time and down time mean the time of establishment from one value to
another value under ON status when the internal standard power dissipater is
enabled.
6. Use 12V/120AH battery for test.
7. When used in parallel, to balance power of each phase, distribute the
instrument to three phases. But must ensure that single machine input voltage
meets Specification requirements.
8. It means the maximum phase current value under minimum work input
voltage.

5.1.14 IT6526C

Parameter
Output Rating ( 0 ℃-40
℃)
Output Resistance
Line regulation
±(％of Output+Offset)
Load regulation
±(％of Output+Offset)
Setup Resolution
Read Back Resolution
Setup Accuracy
Output Voltage
Output Current
Internal Sink
Current 1
Output Power
Internal Sink Power 1
Range
Accuracy 2
Resolution
Voltage
Current
Voltage
Current
Voltage
Current
Power
Voltage
Current
Power
Voltage
Copyright © Itech Electronic Co., Ltd.
Technical Specification
IT6526C Ver:V1.6
0～750V
0～15A
0～1.5A
0～3000W
0～50W
0～188Ω
0.25%+300mΩ
10mΩ
≤0.01%+75mV
≤0.1%+7.5mA
≤0.01%+200mV
≤0.05%+15mA
100mV
1mA
0.1W
100mV
1mA
0.1W
≤0.05%+300mV
128