ITech IT6500C Series User Manual page 44

Limit
P-set
Load
I-set
Slope
OCP
OPP
Limit
Resistance Resistance
Copyright © Itech Electronic Co., Ltd.
Delay: delay time of protection
Off Disable over power protection function
V-Max Maximum voltage setting
V-Min Minimum voltage setting
I-Max Maximum current setting
I-Min Minimum current setting
P-Max Maximum power setting
P-Min Minimum power setting
Setting the load power
Setting the load current
Setting the load slope
I-Fall: current fall slope
I-Rise: current rise slope
P-Fall: power fall slope
P-Rise: power rise slope
Over current protection of load
On(Def)
Off
Over power protection of load
On（Def）
Off
Set the maximum and minimum value of load
I-Max: Maximum load current setting
I-Min: Minimum load current setting
P-Max: Maximum load power setting
P-Min: Minimum load power setting
Output resistance setting
Function and Features
Enable over current
protection function
I: OCP value
Delay: delay time of
protection
Disable over current
protection function
Enable over power protection
function
P: OPP value
Delay: delay time of
protection
Disable over power
protection function
33