Alarm Devices (H2/B4) - Panasonic Brooks FireTracker FT1020G3 Operation Manual

23.4

Alarm Devices (H2/B4)

All outputs of type "Alarm device" can be collectively disabled. Disabled output will stay in
(or return to) the normal condition for the output respectively.
Disabled outputs are listed in menu H4/U1.
Action
"Menu"
Scroll to menu H2.
"↲"
Scroll to menu B4.
"↲"
"↲"
"|"
Text in display
H2 Disable or re-enable
B1 Zone or Zone/Address
B2 Output
B3 Output type
B4 Alarm devices
B5 Routing equipment
B6 Alert annunciation function
Escape
menu
B4 Alarm devices
Disable
All alarm devices
Disable
All alarm devices
-- Re-enable list --------------------------------------------------
All alarm devices
Disable --------------------------------------------------------------
All alarm devices
Re-enable list
All alarm
devices
119
Operation Manual
FT1020G3 Rev 2.10.4
Comments
According to chapter
"Access", see page 42.
Via menu B4, outputs of
type "Alarm device" can
be collectively disabled
in a selected control unit
or all control units.
Press "↲" to disable,
which will be indicated
with "√" and a beep.
The "type" will be
automatically shown in
the Re-enable list
√
Use the soft key "|" to
toggle between Disable
and Re-enable list.
Press "↲" to re-enable.
Re-enabled type will
disappear from the list,
indicated with a beep.