Fault Acknowledge (H6) - Panasonic Brooks FireTracker FT1020G3 Operation Manual

FAULT Acknowledge (H6)

27
For more information of fault indication, etc., refer to chapter "Fault", page 71. See also
section "Fault Messages", page 72 where all fault messages are listed.
Refer also to section "Fault Acknowledge", page 84
All the faults and status / action are stored in the event log and can be listed, see chapter
"Event log (H4/U7)", page 133.
Up to 300 faults in menu H6 can be listed:
•
•
•
The most recent fault is shown on the top of the list
Action Text in display
"Menu"
Scroll to menu H6 H6 FAULT Acknowledge
"↲"
FAULT: Low battery capacity, control unit 00
dd-mm-yyyy hh:mm
FAULT: No reply zone 045 address 06
technical number 000005
Alarm text for 045-06 (user definable)
dd-mm-yyyy hh:mm
FAULT: No reply zone 021 address 05
technical number 000114
Alarm text for 021-05 (user definable)
dd-mm-yyyy hh:mm
Not corrected (not serviced) and not acknowledged faults (no status information)
Not corrected (not serviced) but acknowledged faults (acknowledged)
Corrected (serviced) but not acknowledged faults (serviced).
Fault 1/3 is selected
Previous
page
/Serviced
/Acknowledged
Next
page
146
Operation Manual
FT1020G3 Rev 2.10.4
Comments
According to chapter
"Access", see page 42.
If there are no faults
--List is empty-- will be
shown. It is a dynamic list
in which you can scroll with
"▼" or "▲".
To acknowledge a fault,
select it and press "↲". The
selected fault has a
boarder around it.