Figure 20 Final Display Device Manager - Panasonic Brooks FireTracker FT1020G3 Operation Manual

Operation Manual
FT1020G3 Rev 2.10.4
11. Right-click on "USB Serial Port" and select "Update Driver", follow the same
procedures as per "Fire Alarm CU EBL512 G3" to update the USB serial port.
When completed, click "Close". Before clicking Close, make a note of the COM-
port number shown in the title row of this dialog (COM7 in this case). This COM-
port number should be used in EBLWin / EBL Firmware Manager when logging on
or downloading firmware to the control unit.
12. The driver installation is now complete. In the device manager there should now
be two entries for EBL512 G3 and the COM port number will also be shown:

Figure 20 Final Display Device Manager

Note: The USB drivers for FT1020G3 is also used for the wireless check tool EBL Sniffer.
94