Front Display; Figure 3 Ft1020G3 Front Display - Panasonic Brooks FireTracker FT1020G3 Operation Manual

• Main board 5012, see Figure 9 page 30.
 4 x COM loops (0-3) to which the loop units are connected, refer to Figure
 4 x programmable supervised voltage outputs (S0-S3), refer to Figure 24
 2 x programmable relay outputs (R0-R1), refer to Figure 24 page 176.
 4 x programmable supervised / non-supervised inputs (I0-I3), refer to Figure
 6 x 24 V DC outputs (power supply outputs for Web-server / Gateway, ASE
 2 x non-programmable relay outputs for ASE, Fire brigade tx (alarm) and
 Space & connectors for two TLON connection boards (5090).
 RS485 and 24 V
 Connector for expansion boards (4580 & 4581), refer to Figure 24 page 176.
 Connectors for Web-server / Gateway, refer to Figure 24 page 176.
 Connectors for power supply and batteries, refer to Figure 24 page 176..
Power supply, refer to Figure 24 page 176.
•
 Switch mode power supply, 230 V
 Space and connection cables for two Sealed Lead-Acid backup batteries.
 Battery temperature sensor.
• Space for up to six expansion boards 458x.
Note: Some drawings shown in Chapter 34 page 173, others are shown in a separate
drawing document
3.4

Front Display

L1
L2
L3
L4
L5
L6
L7,L8
L9,L10
L11,L12
L13,L14
24 page 176.
page 176.
24 page 176.
and external equipment), refer to Figure 24 page 176.
Fault tx (fault). Fault relay is normally energised, see Figure 24 page 176..
outputs for Display Units, refer to Figure 24 page 176.
DC
Optional 6U height battery box is available for additional batteries.

Figure 3 FT1020G3 front display

18
Operation Manual
FT1020G3 Rev 2.10.4
/ 24 V (LS150-24).
AC DC
P1
P2
P3
P5 - P8
P4
P9