Present System Status (H4); Disablement (H4/U1) - Panasonic Brooks FireTracker FT1020G3 Operation Manual

Present System Status (H4)

25
25.1

Disablement (H4/U1)

This is a dynamic list of all disablements in the system. A disabled zone programmed with
address 00 will be displayed as ZZZ-00.
Disablements by time channels are listed in menu H4/U2.
Action
"Menu"
Scroll to menu H4.
"↲"
"↲"
"ESC"
Text in display
H4 Present system status
U1 Disablement
U2 Disablement by time channel
U3 Open doors
U4 Sensor values
U5 Sensors activating SERVICE signal
U6 Technical warning
U7 Event log
U8 Information
Zone XXX address XX disabled
dd-mm-yyyy hh:mm
Zone XXX is disabled
Automatic re-enable hh:mm
dd-mm-yyyy hh:mm
Alarm points disabled by time channel in
control unit XX
dd-mm-yyyy hh:mm
....
Disablement 1 to 3 of 7
U1 Disablement
126
Operation Manual
FT1020G3 Rev 2.10.4
Comments
According to chapter
"Access", see page 42.
All disablements in the
system, except
disablements by time
channels, will be shown
in menu U1.
Press "↲".
If there are no disable-
ments --List is empty--
will be shown. It is a
dynamic list in which
you can scroll with "▼"
or "▲". (Information is
shown about
disablements by time
channels.)
Scroll to another menu
or press "ESC".