Table of Contents
Advertisement
25.7
Event Log (H4/U7)
Three event logs (3 x 999 events) are available:
•
•
•
The origin of the event, e.g. CU00 (see below), may be originated from EBLWin, EBLWeb
or Ext# (External system no. # connected via Web-server / gateway).
Action
"Menu"
Scroll to menu H4.
"↲"
Scroll to menu U7.
"↲"
"↲"
"ESC"
Alarm log (alarm events, e.g. fire alarm, fire alarm reset, etc.)
Interlocking log (only interlocking events)
General event log (all other type of events)
Text in display
H4 Present system status
U1 Disablement
U2 Disablement by time channel
U3 Open doors
U4 Sensor values
U5 Sensors activating SERVICE signal
U6 Technical warning
U7 Event log
U8 Information
U7 Event log
Select event log:
Alarm log
Interlocking log
General event log
Command: Reset all alarms
19-02-2021 09:25:30
FIRE ALARM zone 123 address 45
19-02-2021 09:45:15
FIRE ALARM zone 123 address 46
19-02-2021 09:55:01
Event 15 to 13 of 21
U6 Event log
CU00
CU00
CU00
133
Operation Manual
FT1020G3 Rev 2.10.4
Comments
According to chapter
"Access", see page 42.
Use "▼" or "▲" to
select a log. (e.g. the
"Alarm log".)
If there are no events, --
List is empty-- will be
shown. The list is
dynamic in which you
can scroll with "▼" or
"▲". The most recent
event is on top of the
list.
Scroll to another menu
or press "ESC".
Advertisement
Table of Contents
