Panasonic Brooks FireTracker FT1020G3 Operation Manual page 98

2. click "Next", the following dialog displays:
3. Select "English" then "Next", The dialog below shows where the EBL Firmware
Manager will be installed. Click next.
4. The "Confirm Installation" window will display, click "Next" and the installation will
be completed as shown below:
5. Click "Close" to finish installation.
Note: If EBL Firmware Manager is not installed in your PC, you may not be able to
download the firmware to FT1020G3.
FT1020G3 Rev 2.10.4
98
Operation Manual