Side Wall - Henny Penny FlexFusion FPG-221 Service Instructions Manual

Opening and closing the unit

5.2 Side wall

Removing the side wall
Attaching the side wall
NOTICE
14
A
Image: A Sizes 6.x and 10.x; B Size 20.x
1. Unscrew the screws in the side wall.
2. Pull the bottom edge of the side wall forwards.
3. Remove the side wall.
Risk of property damage from leaky housing
• Check seals when attaching the housing parts.
• Replace damaged seals.
1. Insert top edge of side wall.
2. Carefully push the bottom of the side wall inward.
3. Secure the bottom of the side panel with screws.
4. Check that the side wall is in contact with the unit on all sides.
Service-instructions
B