Henny Penny FlexFusion FPG-221 Service Instructions Manual page 44

Service menu - appliance test
Relay Connect
or
K17 X12
Dismantling and re-
programming
44
No. Description
1 Circulating pump G16
After changing the control board the original state is restored. Thus,
the backup relay is not used unnecessarily.
Establish the original condition of the wiring (from X12. 5 to Xx).
Calling up the "Backup relay" in the Service menu.
Select "OFF" using the roller.
The backup relay is deactivated.
Touch the "OK" field.
Changes saved.
Service-instructions
Instruction
Re-connect the line from X12.1 to X12.5 and to
assign a reserve relay to it.