Communication Fault Between I/O And Ignition Module (Oth_Id25); Communication Fault Between I/O And Ignition Module (Top)(Oth_Id26) - Henny Penny FlexFusion FPG-221 Service Instructions Manual

Fault messages & troubleshooting

Communication fault between I/O and ignition module (OTH_ID25)

Replace CAN bus cable between control board, connector X4 and ignition module. Error

Communication fault between I/O and ignition module (top)(OTH_ID26)

Replace CAN bus cable between control board, connector X4 and ignition module. Error
114
Description
There is a communication fault between the control board and ignition
module.
Troubleshooting
eliminated?
No
Replace ignition module. Error eliminated?
No
Replace control board.
Description
There is a communication fault between the control board and ignition
module for the upper burner.
Troubleshooting
eliminated?
No
Replace ignition module. Error eliminated?
No
Replace control board.
Service-instructions