6 Connecting The Unit; Opening And Closing The Housing; Removing And Attaching The Side Wall - Henny Penny FlexFusion Platinum Installation Manual

6 Connecting the unit
DANGER
CAUTION
NOTICE

6.1 Opening and closing the housing

6.1.1 Removing and attaching the side wall

NOTICE
Risk of personal injury and property damage from electric shock
• Prior to working on the Platinum Combi Team, ensure that the
two electrical circuits inside the unit are de-energized.
• Do not operate the unit with the housing open.
Risk of injury from sharp edges
• Wear protective gloves.
Risk of property damage from damage to the lines
• Remove and attach housing components carefully.
Removing the side wall
Image: Removing the side wall
1. Unscrew the bolts in the center of the side wall.
2. Unscrew the bolts at the bottom of the side wall.
3. Pull the bottom edge of the side wall forwards.
4. Remove the side wall.
Attaching the side wall
Risk of property damage from leaky housing
• Check seals when attaching the housing parts.
Installation instructions
Connecting the unit
25