7 Opening And Closing The Housing; Removing And Attaching The Side Wall; Removing The Side Wall; Attaching The Side Wall - Henny Penny FlexFusion FPG-221 Maintenance Instruction

Opening and closing the housing
7 Opening and closing the housing
DANGER
CAUTION
NOTICE

7.1 Removing and attaching the side wall

7.1.1 Removing the side wall

7.1.2 Attaching the side wall

NOTICE
20
Risk of personal injury and property damage from electric shock
• Before working on the unit, ensure that the unit is dead.
• Do not operate the unit with the housing open.
Risk of injury from sharp edges
• Wear protective gloves.
Risk of property damage from damage to the lines
• Remove and attach housing components carefully.
Image: Removing the side wall
1. Unscrew the screws on the holder.
2. Remove holder.
3. Unscrew the screws at the bottom of the side panel.
4. Pull the bottom edge of the side wall forwards.
5. Remove the side wall.
Risk of property damage from leaky housing
• Check seals when attaching the housing parts.
Maintenance instructions