Child Restraint Installation - HOLDEN WN CAPRICE 2014 Owner's Handbook Manual

3-22 Seats and Restraints
Child Restraint
Installation Locations
Anchorage points
Using outer anchorage points
1. 30 mm long bolt
2. Lock washer
3. Anchor fitting
4. 10 mm spacer
5. Paper assembly washer
6. Parcel shelf trim
7. Attaching clip
8. Front of vehicle
Holden child restraint fitting
1. Unscrew the cover plug.
2. Install the bolt (1), lock
washer (2), anchor fitting (3),
spacer (4) and paper washer (5).
3. Tighten the bolt to 20 ± 5
(Newton metres).