Headlamp High/Low-Beam; Daytime Running; Lamps (Drl); Automatic Headlamp - HOLDEN WN CAPRICE 2014 Owner's Handbook Manual

6-2 Lighting
Headlamp High/
Low-Beam Changer
To activate high beam:
With the headlamps on, push
the lever toward the front of
vehicle until it clicks, then
release.
The high beam indicator lamp
illuminates on the instrument
panel.
To return to low beam:
Push the lever towards the front
of the vehicle then release.
To flash the high beam lamps:
Pull the lever toward the rear of
the vehicle and release.
The high beam lamps can be
flashed even if the headlamps
and/or ignition are off.

Daytime Running

Lamps (DRL)

The DRL illuminate when the
following occur:
During daylight conditions.
The engine is running.
The fog lamps are off.
If the lamp control switch is
turned to or , the DRL will
turn off. The DRL will turn on in
night time conditions if the
automatic headlamp system is
turned off.

Automatic Headlamp

System

When the exterior lamp control is
set to AUTO and it is dark enough
outside, the headlamps come on
automatically.
There is a light sensor located on
top of the instrument panel. Do not
cover the sensor. Otherwise the
headlamps will come on when they
are not needed.