HOLDEN WN CAPRICE 2014 Owner's Handbook Manual page 281

The vehicle has rear interior dome/
reading lamps:
1. Pull the forward edge of the
dome lamp downwards, using
only fingers.
2. From the rear side, remove the
bulb holder from the lamp
housing by rotating the bulb
holder anticlockwise.
Do not remove the lens from
the lamp assembly.
3. Pull the bulb out of the bulb
holder.
4. Push the new bulb into the bulb
holder.
5. Install the bulb holder into the
lamp housing by rotating the
bulb holder clockwise.
6. Refit the lamp into the rearward
facing locating tabs.
7. Push the forward facing edge
upward into the head lining until
firmly in place.
8. Check lamp operation.
Glove box lamp, door courtesy
lamps
(5W bulb)
1. Open the glove box.
2. Remove the lens housing with a
fine flat-blade screwdriver.
3. Pull the bulb out of the bulb
holder.
4. Push the new bulb into the bulb
holder.
Vehicle Care
5. When the new bulb is in place,
feed the wiring back into the
cavity and push the lens housing
back into place.
10-25