Table of Contents
Advertisement
9-18
Driving and Operating
4. Release the accelerator pedal.
Vehicle speed can be increased
by pressing the accelerator
pedal. When the accelerator
pedal is released, the previously
stored speed is resumed. The
gears can be changed while
cruise control is activated.
Adjusting the set speed
To reduce the set speed, rotate the
wheel down to SET/- or briefly
rotate SET/- repeatedly.Speed
decreases continuously or in small
increments.
To increase the set speed, rotate
the wheel up to RES/+ or briefly
rotate RES/+ repeatedly.Speed
increases continuously or in small
increments.Alternatively, accelerate
to the desired speed and store by
rotating to RES/+.
Deactivation
Press
.
illuminates white.
Cruise control is deactivated.
The stored speed is maintained.
Cruise control automatically
deactivates when:
Vehicle speed is below
approximately 30 km/h.
The brake pedal is pressed.
The shift lever is placed in N.
Traction Control (TC) or
Electronic Stability Control
(ESC) is operating.
Resuming a stored speed
Rotate the wheel up to RES/+ at a
speed above 40 km/h.
The stored speed is resumed.
Turning cruise control off
Press
.
extinguishes.
The stored speed is deleted.
Alternatively, turn the ignition off.
Object Detection
Systems
Forward Collision Alert
(FCA) System
The vehicle may have Forward
Collision Alert (FCA).
The FCA system may help to avoid
or reduce the harm caused by
front-end crashes. FCA provides a
flashing visual alert and beeps when
approaching a vehicle directly
ahead too quickly. FCA also
provides a visual alert if following
another vehicle much too closely.
The
indicator and the FCA alert
are displayed in the Head-Up
Display (HUD).
The forward-looking FCA camera
sensor is on the windscreen ahead
of the rear view mirror. FCA detects
vehicles within a distance of
approximately 60 m and operates at
speeds above 40 km/h.
Advertisement
Chapters
Table of Contents
