Table of Contents
Advertisement
10-60
Vehicle Care
Warning (Continued)
also damages paint and
fabrics. To minimise damage,
wash it off immediately.
Remove rings, metal watch
bands and other metal
jewellery before working
around the battery.
If a permanently connected
hands free telephone kit is
fitted to the vehicle, remove
the fuse for the telephone kit
before jump starting.
Remember to replace the
fuse afterwards.
Jump starting connection posts
The jump start positive (1) and
negative (2) posts are located in the
engine bay on the passenger side.
These posts are used instead of a
direct connection to a battery.
The positive jump start connection
is covered by a red cap.
1. Push the clip to release the top.
2. Remove to expose the terminal.
Jump starting procedure
The battery in both vehicles
must have a negative earth and a
12 volt rating.
1. Position the two vehicles so that
they are NOT touching.
2. Apply the park brakes.
3. Place the shift lever in P.
4. Turn the ignition off.
5. Turn off all lamps and
accessories in both vehicles,
except the hazard warning
flashers or any lights needed for
the work area.
6. Attach one end of the RED
jumper lead to the jump start
positive post (1).
Advertisement
Chapters
Table of Contents
