Table of Contents
Advertisement
10-4
Vehicle Care
Push up on the rear edge of the
release catch and lift. Gas struts
automatically take over to lift and
hold the bonnet in the open position.
Closing
Warning
To avoid injury and/or damage to
the vehicle, check each time,
before the bonnet is closed, that
the contact area is unobstructed.
Lower the bonnet and allow it to
drop into the catch. Check that the
bonnet is engaged.
Warning
If while driving you notice that the
bonnet has not been properly
closed, pull the vehicle over to the
side of the road at the earliest
possible moment and close the
bonnet correctly.
If the wiring of the bonnet switch
is damaged or tampered with, it
will be detected by the vehicle
control system. The alarm will
sound when the alarm system is
armed.
If the bonnet is not engaged
when the vehicle is locked,
will flash immediately. Unlock the
vehicle, close the bonnet
securely and relock.
A
Advertisement
Chapters
Table of Contents
