HOLDEN WN CAPRICE 2014 Owner's Handbook Manual page 197

Re-dial: This command dials the
last number used on the mobile
phone.
Using the Dial or Call
Command
To call a number:
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Dial or Call.
3. Say the entire number without
pausing. The system responds
with the entered number.
4. Say Dial or Call .
Once connected, the person called
will be heard through the audio
speakers.
To call using a name tag:
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Dial or Call and then say
the name tag. For example Call
John at Work.
Once connected, the person called
will be heard through the audio
speakers.
Using the Digit Dial Command
This allows a phone number to be
dialed by entering the digits one at
a time.
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. Say Digit Dial.
3. Say each digit, one at a time, to
dial. After each digit is entered,
the system repeats back the
digit it heard followed by a tone.
After the last digit has been
entered, say Dial.
If an unwanted number is repeated
back, say Clear to clear the last
number.
Once connected, the person called
will be heard through the audio
speakers.
Infotainment System
Using the Re-dial Command
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. After the tone, say Re-dial. The
system dials the last number
called from the connected
mobile phone.
Once connected, the person called
will be heard through the audio
speakers.
Clearing the System
Unless information is deleted out of
®
the vehicle Bluetooth
be retained. This includes phone
pairing information. For directions
on how to delete this information,
see Deleting a Paired Phone/
Device.
7-83
system, it will