Number Plate Lamp; Interior Lamps - HOLDEN WN CAPRICE 2014 Owner's Handbook Manual

10-24 Vehicle Care
4. Install the new bulb into the bulb
holder by pushing it into the
holder and rotating it clockwise.
Ensure that the same colour
bulb is used.
5. Install the bulb holder into
the lamp.
6. Install the components removed
in Step 1.
7. Check lamp operation.

Number Plate Lamp

(W5W bulb)
A. Locking tang
B. Rear number plate
1. Push the locking tang (A)
towards the lens.
2. Pull the lamp assembly
downwards.
3. Remove the bulb holder from the
lamp housing by rotating the
bulb holder anticlockwise.
4. Pull the bulb out of the bulb
holder.
5. Push the new bulb into the bulb
holder.
6. Install the bulb holder into the
lamp housing by rotating the
bulb holder clockwise, ensuring
that the seal is undamaged.
7. Install the lamp assembly into
the surround.
8. Check lamp operation.

Interior Lamps

Rear dome/reading lamps
(W5W bulb)