Table of Contents
Advertisement
27. Replace the tools, container
and flat tyre in the boot.
28. Tighten the upper retaining nut,
lower retaining nut and panel
firmly by hand.
29. Replace the spare wheel cover.
Warning
As soon as possible after
changing a wheel, have the wheel
nuts tightened with a torque
wrench to 170 ± 20
Warning (Continued)
metres). Wheel nuts must be
tightened evenly to the correct
torque in the sequence shown
(refer to Step 26), as wheel nuts
which have not been tightened
properly could eventually allow
the wheel to come off while the
vehicle is moving.
Procedure
1. Park on a hard, level surface, in
a safe location.
2. Apply the park brake.
3. Switch the hazard warning
flashers on.
4. Turn the ignition off and remove
the key from the vehicle.
5. Place automatic transmission
in P.
(Newton
(Continued)
LPG vehicles
Vehicle Care
6. Chock the wheel diagonally
opposite the flat tyre with a
suitable solid object.
7. Open the boot.
10-53
Advertisement
Chapters
Table of Contents
