Tail Lamps - HOLDEN WN CAPRICE 2014 Owner's Handbook Manual

10-22 Vehicle Care
3. Rotate the bulb holder
anticlockwise and remove.
4. Lightly press the bulb and twist
anticlockwise out of the holder.
5. Insert the new bulb and install
the bulb holder following the
guide tab. Ensure that the same
colour bulb is used.
6. Install components removed in
Steps 1 and 2.
7. Check lamp operation.

Tail lamps

Taillamp assembly
Driver side shown
1. Turn signal lamp (PY21W
amber bulb)
2. Reverse lamp (P21W bulb)
3. Brake/taillamp (P21/5W bulb)
The stop/tail bulb is an LED
and is only replaceable by a Holden
Dealer.