HOLDEN WN CAPRICE 2014 Owner's Handbook Manual page 60

3-20 Seats and Restraints
Warning (Continued)
Holden strongly recommends that
you refer to your specific State or
Territory regulations to determine
which child restraint is suitable for
your child.
Warning
Always ensure that the seat belt
fits firmly around the child
restraint.
If a child cannot see out of the
window, do not raise him/her by
means of an ordinary cushion.
It will not stay in place in a
collision and the child can slip out
of the straps and become
entangled.
Fitting some child seats may
require removal of the rear head
restraint(s).
1. Raise the head restraint fully.
2. Insert a small probe into the hole
on the non-adjusting pole guide.
3. Press the probe inwards.
4. Simultaneously, press the
release button.
5. Lift the head restraint up
and out.
6. Store the head restraint in a safe
location.
7. Reinstall the head restraint when
the child seat is no longer fitted.
Warning
Always follow the child restraint
manufacturer's fitting instructions
when installing a child restraint
into the vehicle.
Refer to the relevant
legislation, an approved child
restraint fitting station or capsule
manufacturer's information for the
recommended type of child restraint
to use.
Child restraint seat belt
locking feature
The rear seat belts have a child
restraint locking feature.
When engaged, this feature
prevents the seat belt from being
loosened without releasing the
buckle.
To engage:
1. Clip the metal tongue into the
buckle.
2. Pull the shoulder belt all the way
out of the retractor to set the
lock. When the retractor lock is
set, the belt can be tightened but
not pulled out of the retractor.