Seat Belt Reminders - HOLDEN WN CAPRICE 2014 Owner's Handbook Manual

Table of Contents

Advertisement

is not removed during refuelling.
This prevents false readings due to
fuel movement when cornering.
If the vehicle is idling on a gradient
for an extended period, the gauge
may change, but will correct itself
once moving again. This may take
up to 10 minutes.
Engine Coolant
Temperature Gauge
This gauge shows the engine
coolant temperature when the
ignition is on.
If the indicator needle moves all the
way to H (hot), the engine is too hot.
If the vehicle has been operated
under normal driving conditions, pull
off the road, stop the vehicle, and
turn off the engine as soon as
possible. See Engine Overheating
on page 10-10.
The gauge reading can move
towards the H (hot) under the
following conditions:
Stop-start driving
High speed driving in warm
weather
Hill climbing
Towing
This is normal.

Seat Belt Reminders

Driver Seat Belt Reminder Light
There is a driver seat belt reminder
light on the instrument cluster.
Instruments and Controls
When the vehicle is started
flashes to remind drivers to fasten
their seat belt. Then the light stays
on until the belt is buckled.
A chime sounds when the seat belt
is unbuckled and vehicle speed is
above 22 km/h.
This cycle may continue several
times if the driver remains or
becomes unbuckled during driving
while the vehicle is moving.
If the driver seat belt is already
buckled, neither the light nor chime
comes on.
Passenger Seat Belt Reminder
Light
When the vehicle is started
flashes to remind the front
passenger to fasten their seat belt.
Then the light stays on until the belt
is buckled.
A chime sounds when the seat belt
is unbuckled and vehicle speed is
above 22 km/h.
5-13
light
C
light

Advertisement

Table of Contents
loading

Table of Contents