HOLDEN WN CAPRICE 2014 Owner's Handbook Manual page 199

Re-dial: This command dials the
last number used on the mobile
phone.
Using the Dial or Call
Command
To call a number:
1. Press / . The system
3. View the message. The message
responds Please Say a
view screen is not available while
Command, followed by a tone.
the vehicle is in motion.
2. Say Dial or Call.
• Touch Listen to hear the
3. Say the entire number without
message through the audio
pausing. The system responds
system.
with the entered number.
• Touch Call to dial the contact
4. Say Dial or Call .
or number associated with the
Once connected, the person called text message. Not all phones
will be heard through the audio allow calling the sender of the
speakers. message and will result in not
being able to select Call.
To call using a name tag:
• Touch Reply to reply with a
1. Press / . The system
predefined message, to a text
responds Please Say a
message that was received as
Command, followed by a tone.
an incoming message. Not all
phones support the sending of
2. Say Dial or Call and then say
the name tag. For example Call
messages.
John at Work.
Replying to Text Messages
Once connected, the person called
will be heard through the audio
speakers.
Using the Digit Dial Command
This allows a phone number to be
dialed by entering the digits one at
a time.
1. Press / . The system
responds Please Say a
1. Select the desired message
Command, followed by a tone.
from the display of predefined
2. Say Digit Dial.
messages to send as the reply.
3. Say each digit, one at a time, to
dial. After each digit is entered,
the system repeats back the
digit it heard followed by a tone.
After the last digit has been
entered, say Dial.
If an unwanted number is repeated
back, say Clear to clear the last
number.
2. Touch Send to send the message.
Once connected, the person called
Alternatively, touch Back to cancel
will be heard through the audio
and return to the previous screen.
speakers.
Infotainment System
Infotainment System
Incoming Text Messages
Using the Re-dial Command
1. Press / . The system
responds Please Say a
Command, followed by a tone.
2. After the tone, say Re-dial. The
system dials the last number
called from the connected
mobile phone.
A pop-up screen is displayed when
Once connected, the person called
there is an incoming text message.
will be heard through the audio
The pop-up will remain on the
speakers.
screen until Dismiss is selected.
Clearing the System
• Touch Listen to hear the message
Unless information is deleted out of through the audio system.
®
the vehicle Bluetooth
• Touch View to view the message.
be retained. This includes phone
The message view screen is not
pairing information. For directions
available while the vehicle is in
on how to delete this information,
motion.
see Deleting a Paired Phone/
• Touch Reply to reply to the text
Device.
message using a predefined
message.
• Touch Call to dial the contact or
number associated with the text
message.
• Touch Dismiss to close the pop-up
incoming message screen.
7-85
7-83
system, it will