HOLDEN WN CAPRICE 2014 Owner's Handbook Manual page 200

7-86 Infotainment System
7-82 Infotainment System
Text Messaging Settings
Muting a Call
During a call, all sounds from inside
the vehicle can be muted so that the
person on the other end of the call
cannot hear them.
Using the Infotainment Controls
Rotate and press TUNE/MENU to
select Mute Call. Select again to
cancel mute.
In the Text Message Inbox, touch
Settings to access the Text Message
Transferring a Call
Settings menu.
Audio can be transferred between
®
the Bluetooth system and the
mobile phone.
The mobile phone must be paired
and connected with the Bluetooth
system before a call can be
transferred.
• Touch Manage Predefined
Messages to create a user defined
message that can be used later to
reply to a text message.
Use the touch screen keyboard to
To Transfer Audio from the
enter the message.
®
Bluetooth System to a Mobile
Touch Done to store.
Phone
• To delete a predefined message,
During a call with the audio in the
select the message and touch Yes
vehicle, touch the Transfer Call
to confirm.
button on the screen or press and
• Touch Text Alerts to choose the hold the / button on the
steering wheel. alert behaviour for incoming text
messages:
To Transfer Audio to the
- Text alert with tone
®
Bluetooth System from a Mobile
Phone
- Tone only
Use the audio transfer feature on
- Off
the mobile phone. See your mobile
phone manufacturer's user guide for
more information. Touch the
Transfer to Handset button on the
®
screen or press and hold the
button on the steering wheel.
Dual Tone Multi-Frequency
(DTMF) Tones
The in-vehicle Bluetooth
can send numbers during a call.
This is used when calling a
menu-driven phone system.
Using the Infotainment Controls
1. Select Enter Number.
2. Select the digits on the screen
then touch OK to send.
Hands-Free Phone
Using Bluetooth
Recognition
To use voice recognition, press
the /
wheel. Use the commands below for
the various voice features. For
additional information, say Help
while in a voice recognition menu.
Making a Call
/
Calls can be made using the
following commands.
Dial or Call: These commands can
be used interchangeably to dial a
®
phone number.
system
Digit Dial: This command allows a
phone number to be dialed by
entering the digits one at a time.
®
Voice
button on the steering