HOLDEN WN CAPRICE 2014 Owner's Handbook Manual page 192

7-78 Infotainment System
5. Start the pairing process on the
mobile phone to be paired to the
vehicle. See the mobile phone
manufacturer's user guide.
6. Locate and select the device
named MyLink in the list on the
mobile phone. Follow the
instructions on the mobile phone
to enter the PIN provided in
Step 4, or to confirm the six-digit
code matches. The system
recognises the new connected
phone after the pairing process
is complete.
7. If the phone prompts to accept
connection or allow phone book
download, select always accept
and allow. The phone book may
not be available if not accepted.
Some phones will put
connection request or
phonebook request in a pull
down task bar at the top of the
screen. Drag down the task bar
and look for connection/
phonebook request and accept.
8. Repeat to pair additional
phones.
Listing All Paired and Connected
Phones/Devices
1. Touch Config on the Home
Page and select Phone,
>
or press / .
2. Select Phone Settings.
3. Select Bluetooth.
4. Select Device List.
Deleting a Paired Phone/Device
1. Touch Config on the Home
Page and select Phone,
>
or press / .
2. Select Phone Settings.
3. Select Bluetooth.
4. Select Device List.
5. Select the phone to delete,
select Delete and follow the
screen prompts.
Connecting to a Different Phone
To connect to a different phone, the
new phone must be in the vehicle
and available to be connected to the
®
Bluetooth system before the
process is started.
1. Touch Config on the Home
Page and select Phone,
>
or press / .
2. Select Phone Settings.
3. Select Bluetooth.
4. Select Device List.
5. Select the new phone to connect
to and follow the screen
prompts.
Pairing with Voice Recognition
®
A Bluetooth -enabled mobile phone
must be paired and then connected
to the vehicle before it can be used.
See the mobile phone
manufacturer's user guide for
®
Bluetooth functions before pairing
the mobile phone.