Table of Contents
Advertisement
29. Replace the tools on the
tyre tray.
30. Replace the jack package
cover.
31. Tighten the jack package nut
firmly by hand.
32. Place the wheel onto the
tyre tray.
33. Replace the carpet cover.
34. Slide the wheel and tyre tray
pack to its original position.
35. Fasten the retainer by rotating
clockwise until secure.
Warning
As soon as possible after
changing a wheel, have the wheel
nuts tightened with a torque
wrench to 170 ± 20
metres) and the spare wheel
retainer tightened with a torque
wrench to 8.5 ± 0.5
. Wheel
nuts must be tightened evenly to
the correct torque in the
sequence shown (refer to
Step 28), as wheel nuts which
have not been tightened properly
could eventually allow the wheel
to come off while the vehicle is
moving.
Vehicle Care
(Newton
10-57
Advertisement
Chapters
Table of Contents
