HOLDEN WN CAPRICE 2014 Owner's Handbook Manual page 202

8-2 Climate Controls
Turning the temperature control
knob clockwise past 30°C, will
show HI (hottest).
Turning the temperature control
knob anticlockwise past 16°C,
will show LO (coolest).
A temperature setting between
22°C and 24°C is recommended
as an initial starting point for
comfort.
Single and Dual Zone
Press ZONE to synchronise the
driver and passenger temperatures.
Driver has control will be displayed
on the infotainment display and the
system will operate in
Single-Zone mode.
In this mode the system
temperature is adjusted using the
driver side temperature
control knob.
Dual-Zone mode
Dual-Zone mode allows different
temperatures to be set for the left
and right sides.
Enter Dual-Zone mode by adjusting
the passenger side temperature
control knob when in
Single-Zone mode.
Automatic Operation
1. Turn the ignition on.
2. Press AUTO if the LED on the
Automatic Climate Control
button is not illuminated.
3. Use the temperature control
knobs to adjust the temperature.
4. Adjust the angle of the air vents
for personal comfort.
5. Allow the system to stabilise for
a few minutes.
The automatic climate control
setting does not change when
the ignition is turned off or on.
The automatic climate control
sets the fan speed automatically.
It is not necessary to set a cooler or
hotter temperature to ensure fast
cooling or heating.
Leave the system in automatic
operation to:
Turn the air conditioning on
and off.
Vary the temperature of the air
entering the cabin.
Switch between recirculate or
fresh air.
Vary the fan speed.
Alter air delivery mode vent
selection.
The automatic climate control
system may not work properly if one
or more dashboard vents are
closed.
Manual Operation
Fan speed
Rotate to increase or
decrease the fan speed.
The fan speed appears on the
infotainment display.
Pressing will turn the system
on/off.