HOLDEN WN CAPRICE 2014 Owner's Handbook Manual page 236

9-28 Driving and Operating
10. The camera display appears
on the infotainment screen.
Default Display Selection
The default display Park Assist or
Rear View Camera may be
selected:
1. Turn the ignition on.
2. Press VOL to turn the
infotainment system on.
3. Press Home then touch the
Config screen button.
4. Turn the TUNE/MENU knob to
highlight Display Settings.
5. Press the centre of the TUNE/
MENU knob to select the
Display Settings menu.
6. Select Park Assist Mode.
7. Select Show Rear View Camera
or Show Park Assist.
The option selected is indicated
by .
8. Touch Back to exit.
Objects of different heights will
appear to be different distances
from the vehicle.
The RVC display will override all
other operating displays.
The RVC display may be
temporarily interrupted when
some audio system or climate
control settings are changed.
The PA animation on the
infotainment screen will not be
seen when the reverse camera
is enabled. See Park Assist
is enabled. See Parking Assist
on page 9-21.
on page 9-21.
The PA warning tones will still be
heard when the reverse camera
is enabled. See Park Assist
is enabled. See Parking Assist
on page 9-21.
on page 9-21.
The reverse camera system may be
affected by the following:
If sun or headlamp beams are
shining directly into the
camera lens.
If the vehicle sustains any
damage in the area of the
camera lens. Contact a Holden
Dealer.
If dirt, snow or ice has built up,
clean the lens. See Cleaning
previously in this section.
Rear Cross Traffic Alert (RCTA)
Rear Cross Traffic Alert (RCTA)
displays a red warning triangle with
an arrow, on the infotainment
display, to warn of traffic coming
from either direction. This system
detects objects coming from up to
25 m from the left or right side of the
vehicle. When an object is detected,