Replacing An Ip Phone 2004; Removing An Ip Phone 2004 From Service; Ip Phone - Nortel 2001 Installation And Operation Manual

Page 106 of 302

Replacing an IP Phone 2004

Removing an IP Phone 2004 from service

553-3001-368 Standard 4.00
Nortel Networks IP Phone 2004
Two telephones cannot share the same TN. You must remove the IP
Phone 2004 that is currently using the TN.
Procedure 23

Replacing an IP Phone 2004

1 Disconnect the IP Phone 2004 that you want to replace.
2 Follow Procedure 18 on
on page 97 (dynamic IP assignment) to install and configure the IP Phone
2004 .
3 Enter the same TN and Node Number as the IP Phone 2004 you
replaced. The system associates the new IP Phone 2004 with the
existing TN.
Procedure 24

Removing an IP Phone 2004 from service

1 Disconnect the IP Phone 2004 from the network or turn the power off.
Note: The service to the PC is disconnected as well if the PC is
connected to the IP Phone 2004 .
If the IP Phone 2004 was automatically configured, the DHCP lease
expires and the IP address returns to the available pool.
2 In LD 11, OUT the TN.
February 2005
IMPORTANT!
page 93 (static IP assignment) or Procedure 19
End of Procedure
End of Procedure