Nortel 2001 Installation And Operation Manual page 30

Page 30 of 302 Nortel Networks IP Phone 2001
553-3001-368 Standard 4.00
Static IP address assignment
During the installation, the IP Phone 2001 parameters are entered manually
using the key pad.
Your system administrator provides the following information: IP address,
subnet mask, and default Media Gateway.
You must also enter the Connect Server parameters including: IP address,
port number, action, and retry count.
Go to Procedure 2, "Installing an IP Phone 2001 for the first time" on
page 31.
Dynamic IP address assignment — Partial DHCP
For a partial DHCP installation, you must provide, through the IP Phone 2001
key pad, the Connect Server parameters including: IP address, port number,
action, and retry count. Other parameters (telephone IP address, subnet mask
and default Media Gateway) are retrieved from the DHCP server.
The IP Phone 2001 password, node ID and TN must be entered manually
from the key pad.
For more information about DHCP servers, see Data Networking for Voice
over IP (553-3001-160).
Go to Procedure 3, "Installing an IP Phone 2001 for the first time using
DHCP" on page 36.
Dynamic IP address assignment — Full DHCP
For a full DHCP installation, all parameters (telephone IP address, subnet
mask, default Media Gateway, Connect Server IP address, port number,
action, and retry count) are retrieved from the DHCP server to recognize the
IP Phone 2001.
The IP Phone 2001 password, node ID, and TN must be entered manually
from the key pad.
February 2005