Nortel 2001 Installation And Operation Manual page 146

Page 146 of 302
553-3001-368 Standard 4.00
Nortel Networks IP Softphone 2050
Language
To select the display language of the IP Softphone 2050, highlight the
Language option from the Services menu and press the Select soft key.
Select a language from the sub-list of supported languages that is displayed
then press the Select soft key. When finished, press the Exit soft key to return
to the Services menu. See "Language support" on
Time and date format
To change the time and date display format of the IP Softphone 2050,
highlight the Time and Date Format option from the Services menu and
press the Select soft key. A list of different format types displays. Highlight
the format and press the Select soft key to change the format. When finished,
press the Exit soft key to return to the Services menu and the changed format
is saved. The displayed time and date is sent from the TPS to the IP Softphone
2050, and therefore can vary from the time set on the PC.
Note: Because of the geographic independence that an IP connection
provides, it is possible that an IP Softphone 2050 is not in the same time
zone as its host Call Server. The current time and date mechanism within
the Call Server assumes that all of its peripheral devices are in the same
time zone. The time displayed on the IP Softphone 2050 is always the
time known by the internal clock of the system.
Call timer enable
The Call Timer option allows the user to control the automatic timing of an
established call locally at the IP Softphone 2050. The call timer can be
switched between Enable and Disable mode.
To enable or disable the call timer, select the Call Timer option from the
Services menu and press the Select soft key. The current setting of the Call
Timer displays. Press the Change soft key to toggle the mode. When finished,
press the Cancel soft key to return to the Services menu and the selected
mode is saved.
Ring type
To change the ringer tone of an IP Softphone 2050, highlight the Ring Type
option from the Services menu and press the Select soft key.
February 2005
page 140.