Nortel 2001 Installation And Operation Manual page 178

Page 178 of 302
Listener IP tab
Trace tab
553-3001-368 Standard 4.00
Nortel Networks IP Softphone 2050
The Listener IP screen (see Figure 28 on
users only. This screen identifies the IP addresses and ports where the IP
Softphone 2050 is listening for traffic from the Communication Server. You
can use this screen to override the port assignments when there is a conflicting
application on the computer. Table 27 describes the Listener IP attributes that
can be configured.
Table 27
Listener IP screen settings
Attribute Description
Use all The IP Softphone 2050 listens to the IP addresses on all of
addresses the network interface cards on the PC for traffic from the
Communication Server. This is the normal mode of
operation.
This is the default value.
Use Enter a specific address if there is more than one Ethernet
specific card and an application conflict exists.
address
Port Adjust the Port value if another application on the computer
is using the same port. The two applications can co-exist by
moving the port or IP address that the IP Softphone 2050 is
listening to. The IP Softphone 2050 uses port 4100 to
communicate from the PC.
This option is for expert-level debugging. The Trace feature is turned off by
default. Use this feature only for debugging purposes.
February 2005
page 179) is intended for expert