Figure 7
IP Phone 2002 Ethernet network interface connections
Network
Ethernet
PC
Ethernet
Timing information
There are only four seconds between plugging in the IP Phone 2002
power transformer and the appearance of the Nortel Networks logo on
the display. When you see the logo, you have one second to respond by
pressing the four feature keys at the bottom of the display in sequence
from left to right. If you miss the one-second response time, the
IP Phone 2002 attempts to locate the connect server. Wait until it is
finished, and then begin the power up sequence again.
Nortel Networks IP Phone 2002
IMPORTANT!
IP Phones
Description, Installation, and Operation
Page 67 of 302