Nortel 2001 Installation And Operation Manual page 173

USB Headset Adapter tab
Table 25
USB Headset Adapter tab settings
Attribute
Version
Headset Type
Use backlight
Configure Smart Functions
Table 25 describes the settings for the USB Headset Adapter tab (see
Figure 26 on page 174).
Description
Shows the version of the USB Headset Adapter.
Note: If the USB Headset Adapter is not recognized or has a
version number lower than 2.0, the other features are grayed out
and unavailable.
Select the type of headset that you have connected to the USB
Headset Adapter. For optimal performance, use a headset that
matches one of the options that appear on the Headset Type
drop-down list.
Note: Due to differences in headset construction, you may not
get optimal audio performance when using a headset that does
not appear on the list.
Select this check box to enable the backlight for the USB
Headset Adapter buttons. Clear this check box to disable the
backlight for the USB Headset Adapter buttons.
Note: When you enable the backlight, you can use the state of
the backlight to quickly determine if the IP Softphone 2050 is
running. When the backlight is on, the IP Softphone 2050 is
running. When the backlight is off, the IP Softphone 2050 is not
running.
Click this button to set the options that are available when you
press the Smart Functions button on the USB Headset Adapter.
Nortel Networks IP Softphone 2050
IP Phones Description, Installation, and Operation
Page 173 of 302